TRANSOCEAN 2.30EU is a flexible, self-leveling, copper-tinted antifouling agent that offers protection against fouling of marine organisms for a period of up to 12 months, depending on the area and conditions. The product is suitable for all types of vessels, from small pleasure boats to large commercial vessels, and can be applied to all Transocean anti-corrosion systems, such as TRANSOCEAN 1.10EU, TRANSOCEAN 1.20EU and TRANSOCEAN 1.30EU. TRANSOCEAN 2.30EU has a high resistance to wear, corrosion and hydrolysis, and has excellent adhesion to the substrate. The product complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26), and does not contain biocidal substances, such as organo-caenium, organo-zinc or organo-cadmium. TRANSOCEAN 2.30EU is available in two colors, red and blue, and can be painted with a brush, roller or air gun.
The Transocean Barrierkote is a two-component barrier coating for all metallic and non-metallic substrates. Provides excellent water resistance and can be repainted with various Transocean finishes.
Transocean Cleanship 291EU Glossy and smooth paint specially formulated with a mixture of colored polymers with a combination of biocides. The surface is self-cleaning with a carefully adjusted balance of hydrophobic and hydrophilic binders.
This mechanism allows washdown control and allows easy repainting after service life. Transocean Cleanship 291EU is suitable for upgrading existing long service life systems. The product complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26).
Transocean Filler 400 is a lightweight epoxy putty suitable for repairing cracks and damage to metal, wood and GRP vessels. The putty can be used below and above the waterline and can be applied up to a thickness of 2 cm.
TRANSOCEAN GELCLEAN 7003 A specially formulated acid emulsion designed to revitalize painted surfaces, removing rust stains and surface oxidation. It is ideal for removing salt and general contamination before applying a new coat of paint. Transocean Gelclean 7003 will lighten and remove surface oxidation that forms on non-ferrous material such as aluminium.
Transocean Optima 234 EU – Dellcrom an elastic, self-leveling antifouling (Ants) colored with a combination of biocides to protect the underwater part of the vessel from various types of fouling organisms such as algae and algae. Typically offers up to 18 months of protection in areas with moderate pollution pressure. Extended periods of protection can be achieved in areas with lower pollution activity. The product can be applied to all anti-corrosion systems. Transocean Optima 234 EU – Dellcrom complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26).
TRANSOTHANE FINISH 3.43 An acrylic based polyurethane aliphatic coating for all weather areas. The product provides excellent durability and offers excellent gloss and color retention.
TRANSPOXY MASTERBOND 4.67 A high solids epoxy primer/coating formulated with Masterbond binder technology. Transpoxy Masterbond 4.67 has excellent anti-corrosion properties and good impact and abrasion resistance. Good adhesion to steel substrates prepared with St3 and compatible with most old coatings. The product has good adhesion to approved zinc silicate catalysts.
TRANSUNILAC FINISH 3.31 high quality, modified alkyd topcoat for use on plastic, tiles, decks and superstructures. The product has good durability and offers good gloss and color retention. The product is available in many shades and is easy to apply. When combined with Primer Transogard.
TRANSUNILAC FINISH 3.31 has a low solvent content (LOW VOC) and has been certified to comply with MEDModule B in Directive 2009/26/EC and SOLAS 74, Reg. II-2/3, II-2/5, II-2/6, II-2/9 & X / 3, IMO MSC / Circ. 1120, 2000 HSC Code 7 and IMO FTP Cod
TRANSVINYPOX 2.06 SEALER.
A 2-component modified epoxy, designed as a binder or isolation material in epoxy anti-corrosion systems to improve the adhesion of subsequent anti-fouling systems. It offers a very wide range of repainting with 1-component and 2-component paints and can therefore be used in marine paint systems above and below the waterline.
TRANSVINYPOX 2.06 SEALER epoxy primer can also be used as a sealant on old and polished antifouling systems as the product provides good compatibility with various antifouling systems. Transvinypox has excellent flexibility and adhesion to various substrates such as aluminium, galvanized steel, wood-reinforced polyester and glass fibre. The product hardens at temperatures of 0 ° C and tolerates a lesser degree of surface preparation.
