ACRYLDEL DIRECT 2k Acrylic glossy paint (85 gloss). – Used directly on steel, galvanized sheet, aluminum and plastics – Excellent adhesion and protection, as well as scratch and oil resistant. properties – complies with Directive 2004 / 42 / EC
ANTIGRAFITTI DC two-component polyurethane paint that contains a solvent.
It is specially designed for use on inorganic substrates, such as mineral building materials, to which it gives the ability to repel water and oils.
It is recommended for use in natural and synthetic stones, concrete, concrete, walls, fibrous mortars, metals, wood, plastic, paper and non-glazed ceramic tiles to allow the removal of foreign matter such as grease, graffiti and posters.
ANTIGRAFITTI DC excellent resistance to UV-radiation and weather conditions even in a marine or industrial environment. Excellent and long-lasting hydrophobic and oleophobic behavior.
Acrylic base component marking color. Marking of roads and motorways, airport corridors, car parks, playgrounds and sports areas and sidewalks. It meets the specific requirements for road construction. Road marking of the city. With improved drying. Suitable for high traffic requirements.
It has a P7 class certificate from the AETEC laboratory.
Gold spray plastic 1: 1 is a 3-component, solvent-free, non-solvent-free, psychoplastic paint coating that dries by adding 2% catalyst to the B component. The A component is then mixed with the B component in a 1: 1 ratio (49: 49: 2).
Recommended as permanent marking on roads with very high traffic load. Gold spray plastic 1: 1 is a flexible, UV-stable, ISO certified methyl methacrylate (MMA) durable coating color, applied to the pavement by special airless spray machines with a film thickness of 0.6-1.2 mm.
Depending on the type of glassware it gives both Type I and Type II diagrams. It dries very quickly, meaning the road can be put into circulation very soon after application, usually in less than half an hour.
Features of Gold spray plastic 1: 1:
Very durable
It can be applied to asphalt (new or old) and concrete
More efficient durable road signs
Completely UV-stable with zero VOC emissions
10x more durable than plain acrylic paint (on average)
Can be applied at very low temperatures (0 ° C)
Very easy to maintain
EPODEL FLOOR SL Spreadable two-component epoxy paint ideal for concrete floors with intense daily stress. It presents great hardness against mechanical stress and strong adhesion. It has high resistance to chemicals, solvents, caustic liquids and petroleum products. It is ideal for painting concrete floors in car parks, garages, workshops, factories and warehouses.
EPODEL FOOD E-3100 Two-component paint based on epoxy resins of medium molecular weight to be used in combination with polyamine resins, Protection of industrial facilities, metal structures, concrete or cement surfaces, operating in an aggressive industrial environment.
In a primed system, it meets the corrosion resistance requirements, according to categories C4, C5 – ISO 12944.
EPODEL FOOD E-3100 Excellent resistance to moisture and atmospheric conditions. Very good resistance to chemical corrosion, oil, fuel, salt. The product has a Certificate of Conformity for a detailed application that is in direct contact with drinking water.
Epoxy Klar NR-641 is a clear, low-viscosity two-component epoxy varnish that provides excellent protection and gloss on concrete surfaces. This product has high resistance to vertical and horizontal corrosion, moisture, UV radiation and heat. Epoxy Klar NR-641 can be applied by brush or roller depending on the desired thickness and the surface we want to cover. This product is ideal for creating transparent coatings on cement, concrete, marble, granite, stone, wood and metal. Epoxy Klar NR-641 gives a natural and soft look to surfaces, increasing their lifespan and value.
SMALTOFIX- HYDRO Ready-to-mix two-component epoxy paint. It is specially designed for interior and exterior painting of metal and concrete tanks and pipelines for the storage and transport of drinking water, sea water and brackish water.
SMALTOFIX-HYDRO fulfills the requirements of the American Regulation AWWA – C – 210 and the German Federal Regulation KTW for the interior painting of drinking water and food containers.
SMALTOFIX-HYDRO is approved by the German Institute of Hygiene Gelsenkirchen.
TRANSOCEAN 2.30EU is a flexible, self-leveling, copper-tinted antifouling agent that offers protection against fouling of marine organisms for a period of up to 12 months, depending on the area and conditions. The product is suitable for all types of vessels, from small pleasure boats to large commercial vessels, and can be applied to all Transocean anti-corrosion systems, such as TRANSOCEAN 1.10EU, TRANSOCEAN 1.20EU and TRANSOCEAN 1.30EU. TRANSOCEAN 2.30EU has a high resistance to wear, corrosion and hydrolysis, and has excellent adhesion to the substrate. The product complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26), and does not contain biocidal substances, such as organo-caenium, organo-zinc or organo-cadmium. TRANSOCEAN 2.30EU is available in two colors, red and blue, and can be painted with a brush, roller or air gun.
The Transocean Barrierkote is a two-component barrier coating for all metallic and non-metallic substrates. Provides excellent water resistance and can be repainted with various Transocean finishes.
Transocean Cleanship 291EU Glossy and smooth paint specially formulated with a mixture of colored polymers with a combination of biocides. The surface is self-cleaning with a carefully adjusted balance of hydrophobic and hydrophilic binders.
This mechanism allows washdown control and allows easy repainting after service life. Transocean Cleanship 291EU is suitable for upgrading existing long service life systems. The product complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26).
Transocean Filler 400 is a lightweight epoxy putty suitable for repairing cracks and damage to metal, wood and GRP vessels. The putty can be used below and above the waterline and can be applied up to a thickness of 2 cm.
