TRANSOCEAN 2.30EU is a flexible, self-leveling, copper-tinted antifouling agent that offers protection against fouling of marine organisms for a period of up to 12 months, depending on the area and conditions. The product is suitable for all types of vessels, from small pleasure boats to large commercial vessels, and can be applied to all Transocean anti-corrosion systems, such as TRANSOCEAN 1.10EU, TRANSOCEAN 1.20EU and TRANSOCEAN 1.30EU. TRANSOCEAN 2.30EU has a high resistance to wear, corrosion and hydrolysis, and has excellent adhesion to the substrate. The product complies with the specifications of the IMO Convention on Protection against Pollution (AFS / CONF / 26), and does not contain biocidal substances, such as organo-caenium, organo-zinc or organo-cadmium. TRANSOCEAN 2.30EU is available in two colors, red and blue, and can be painted with a brush, roller or air gun.
The Transocean Barrierkote is a two-component barrier coating for all metallic and non-metallic substrates. Provides excellent water resistance and can be repainted with various Transocean finishes.
Transocean Filler 400 is a lightweight epoxy putty suitable for repairing cracks and damage to metal, wood and GRP vessels. The putty can be used below and above the waterline and can be applied up to a thickness of 2 cm.
TRANSPOXY MASTERBOND 4.67 A high solids epoxy primer/coating formulated with Masterbond binder technology. Transpoxy Masterbond 4.67 has excellent anti-corrosion properties and good impact and abrasion resistance. Good adhesion to steel substrates prepared with St3 and compatible with most old coatings. The product has good adhesion to approved zinc silicate catalysts.
TRANSVINYPOX 2.06 SEALER.
A 2-component modified epoxy, designed as a binder or isolation material in epoxy anti-corrosion systems to improve the adhesion of subsequent anti-fouling systems. It offers a very wide range of repainting with 1-component and 2-component paints and can therefore be used in marine paint systems above and below the waterline.
TRANSVINYPOX 2.06 SEALER epoxy primer can also be used as a sealant on old and polished antifouling systems as the product provides good compatibility with various antifouling systems. Transvinypox has excellent flexibility and adhesion to various substrates such as aluminium, galvanized steel, wood-reinforced polyester and glass fibre. The product hardens at temperatures of 0 ° C and tolerates a lesser degree of surface preparation.
